Prepare Overlapping Raw Data (not recommended)

The use of this workflow is not recommended any more, and Prepare Raw Data should be used instead.

If you wish to use this workflow anyway, launch the "Prepare Overlapping Raw Data" and select the reads that you wish to prepare for further analyses. In the wizard shown in figure 14.1, specify the trimming parameters and select the adapter trim list.

Image prepare_overlapping_reads_step2
Figure 14.1: Select your adapter trim list. You can use the default trim parameters or adjust them if necessary.

Finally, choose to Save the results. Prepare Overlapping Raw Data performs quality control and trimming of the sequencing reads. It also merges overlapping read pairs. The following outputs are generated: