The data in the Navigation Area
organized into a number of Locations
. When the
CLC Genomics Workbench
is started for the first time, there is one location called
(unless your computer administrator has configured the installation otherwise).
A Workbench data location represents a folder on the computer: The data shown
under a Workbench location in the Navigation Area is stored on the
computer, in the folder the location points to.
This is explained visually in figure 3.2. The full path to the system folder can be seen by mousing over the data location folder icon as shown in figure 3.3.
Figure 3.2: In this example the location called "CLC_Data" points to the folder at C:\Users\<username>\CLC_Data.
Figure 3.3: Mousing over the location called 'CLC_Data' shows the full path to the system folder, which in this case is C:\Users\<username>\CLC_Data.
Data held on a CLC Server
If you have logged into a CLC Server from your Workbench, then data stored on the CLC Server will also be listed in the Workbench Navigation Area, as illustrated in figure 3.4.
Figure 3.4: Data areas on the CLC Server are highlighted with blue square icons in the Navigation Area.