Advanced preferences

Proxy Settings

The Advanced settings include the possibility to set up a proxy server. This is described in Network configuration.

Default data location

The default location is used when you import a file without selecting a folder or element in the Navigation Area first. It is set to the folder called CLC_Data in the Navigation Area, but can be changed to another data location using a drop down list of data locations already added (see Adding locations). Note that the default location cannot be removed, but only changed to another location.

Data Compression

CLC format data is stored in an internally compressed format. The application of internal compression can be disabled by unchecking the option "Save CLC data elements in a compressed format". This option is enabled by default. Turning this option off means that data created may be larger than it otherwise would be.

Enabling data compression may impose a performance penalty depending on the characteristics of the hardware used. However, this penalty is typically small, and we generally recommend that this option remains enabled. Turning this option off is likely to be of interest only at sites running a mix of older and newer CLC software, where the same data is accessed by different versions of the software.

Compatibility information:

To share specific data sets for use with software versions that do not support the compression applied by default, we recommend exporting the data to CLC or zip format and turning on the export option "Maximize compatibility with older CLC products". See Export of folders and data elements in CLC format.

NCBI Integration

Without an API key, access to NCBI from asingle IP-address is limited to 3 requests per second; if many workbenches use the same IP address when running the Search for Reads in SRA..., Search for Sequences at NCBI and Search for PDB Structures at NCBI tools they may hit this limit. In this case, you can create an API key for NCBI E-utilities in your NCBI account and enter it here.

NCBI BLAST

The standard URL for the BLAST server at NCBI is: https://blast.ncbi.nlm.nih.gov/Blast.cgi, but it is possible to specify an alternate server URL to use for BLAST searches. Be careful to specify a valid URL, otherwise BLAST will not work.

Read Mapper

It is possible to change the size (in MB) of the Read Mapper reference cache.

BaseSpace configuration

Import from BaseSpace requires no configuration. The settings in this area are optional.

SRA Download

The following options are available:

Reference Data

URL to use: Reference data sets available under the QIAGEN Sets tab of the Reference Data Manager are downloaded from the URL provided here. In most cases, this setting should not be changed.

Download to CLC Server via: Relevant when the "On Server" option is chosen in the Reference Data Manager, so that data in the CLC_References area of a CLC Genomics Server is used. With the "CLC Server" option chosen (figure 4.9), data downloaded to a CLC Genomics Server using the Reference Data Manager is downloaded directly to the Server, without going via the Workbench.

If the CLC Genomics Server has no access to the external network, but the CLC Workbench does, choose the "CLC Workbench" option. Data is then downloaded to the Workbench and then moved to the reference data area on the Server. The Workbench must be left running throughout the data download process when this option setting is selected.

Image preferences-reference
Figure 4.9: Some of the options in the Advanced area of the Workbench Preferences.

CLC Server Login

It is possible to Save the login username and password, initiate automatic server login when opening the workbench, and bypass a proxy server.