Aligning alignments
The Redo alignment option becomes available when an alignment is provided as input to the tool (figure 14.1).
- Leave this box unchecked when aligning additional sequences to the original alignment. Equal sized gaps may be inserted in all sequences of the original alignment to accommodate the alignment of the new sequences (figure 14.5), but apart from this, positions in the original alignment are fixed.
- Check this box to realign the sequences in the alignment provided as input. This can be useful, for example, if you wish to realign using different gap costs than used originally.
A new alignment is output, whether or not Redo alignment option is checked.
Figure 14.5: The original alignment is shown at the top. That alignment and a single additional sequence, with four Xs added for illustrative purposes, were used as input to Create Alignment. The "Redo alignment" option was left unchecked. The resulting alignment is shown at the bottom. Gaps have been added, compared to the original alignment, to accommodate the new sequence. All other positions are aligned as they were in the original alignment.