Subsections

Common issues when using a network license

No license available at the moment

If all the network licenses or CLC Main Workbenchare in use, you will see a dialog like that shown in figure 1.21 when you start up the Workbench.

Image alllicensesused-combined
Figure 1.21: This window appears when there are no available network licenses for the software you are running.

This means others are using the network licenses. You will need to wait for them to return their licenses before you can continue to work with a fully functional copy of software. If this is a frequent issue, you may wish to discuss this with your CLC License Server administrator.

Clicking on the Limited Mode button in the dialog allows you to start the Workbench with functionality equivalent to the CLC Sequence Viewer. This includes the ability to access your CLC data.

Lost connection to the CLC License Server

If the Workbench connection to the CLC License Server is lost, you will see a dialog as shown in figure 1.22.

Image unabletolocatelicenseserver
Figure 1.22: This message appears if the Workbench is unable to establish a connection to a CLC License server.

If you have chosen the option to Automatically detect license server and you have not succeeded in connecting to the License Server before, please check with your local IT support that automatic detection will be possible to do at your site. If it is not possible at your site, you will need to manually configure the CLC License Server settings using the License Manager, as described earlier in this section.

If you have successfully contacted the CLC License Server from your Workbench previously, please consider discussing this issue with your CLC License Server administrator or your local IT support, to make sure that the CLC License Server is running and that your Workbench can connect to it. There may be situations where you wish to use a different license or view information about the license(s) the Workbench is currently using. To do this, open the License Manager using the menu option:

        Help | License Manager (Image license_manager)

The license manager is shown in figure 1.23.

Image licensemanager-combined
Figure 1.23: The license manager.

This dialog can be used to:

If you wish to switch away from using a network license, click on the button to Configure License Server and uncheck the box beside the text Enable license server connection in the dialog. When you restart the Workbench, you can set up the new license as described in Licenses.